Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 429)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 429
Custom Units and Value Types Appendix B
Verify Value Types
1. Click the Value Types tab.
2. Click the Values types pull-down menu to
show the available value types.
3. Verify that all value types required appear in
the list.
You’ll need to create the value types that don’t appear in the FactoryTalk EnergyMetrix list. For the Efficient
Industries Plant 1 example, you’ll need to create these value types:
• Fuel Oil Usage
• Propane Usage
• Water Usage
• Natural Gas Usage
• Steam Usage
• Air Usage
Create Value Types
1. Click Add on the Value Types tab.