Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 217)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 217
FactoryTalk View ME Energy Faceplates Chapter 11
Configure PowerMonitor 1000 Faceplates
The PowerMonitor 1000 faceplate is a graphic display that you can add to your FactoryTalk View ME application. The
display provides real-time data such as voltage, current, power, and energy from a PowerMonitor 1000 meter. Data is polled
from a PowerMonitor 1000 meter via RSLinx Enterprise so a controller is not required. Because parameter passing has
been implemented, you only have to maintain a single display for all PowerMonitor 1000 meters on a plant floor.
The PowerMonitor 1000 faceplate is compatible only with the PowerMonitor 1000 EM3 model over an Ethernet
connection.
Renames the Device, and the Status 1 and Status 2
counters.
Shows voltage, current, and frequency information for
three phases.
Shows real, reactive, and apparent power, and
power factor data.
Shows real, reactive, and apparent energy, status count
and demand data.
Shows voltage and current phase angles. A phasor
diagram shows the vector angles for each phase.
Configuration Display VIF Display
E Display
PWR Display
PH Display