Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 356)

356 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
Transfer Runtime File to PanelView Plus Terminal
Follows these steps to download the runtime file just created to the PanelView Plus terminal.
1. Choose Transfer Utility from the Tools
menu.
2. Click the Download
tab.
3. Click the … icon to
locate the source
runtime file.
4. Choose Internal
Storage box, from the
Destination storage
type list.
5. Optionally, check
Run application at
start-up to start the
application when the
download finishes.
6. Browse through the RSlinx Enterprise communication tree to select the destination PanelView Plus terminal for the
download.
7. Click Download.
8. Click OK when the download completes successfully.
9. Click Exit to close the File Transfer Utility.
10. Choose Exit from the File menu to close the
FactoryTalk View Studio software.