Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 208)

208 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 10 FactoryTalk EnergyMetrix Software and PowerMonitor Device Maintenance
3. To check or edit settings of a specific event log, right-
click the log name and choose Properties.
For this example, the System log was selected.
For best results, the application and system logs should
be set to at least 512 MB in size, and to overwrite as
needed.
At times it may be helpful to restart the FactoryTalk EnergyMetrix software logger service. To restart the service, open the
Windows Service Control panel, in the Administrative Tools, find the FactoryTalk EnergyMetrix Logger Service in the
listing of services, and restart the service.
Running System Configuration Reports
The system configuration report documents the configuration of any or all of the FactoryTalk EnergyMetrix software
objects listed in the Report Setup page. In addition, you may select all groups or an individual group/domain and its
subgroups. Groups are limited to those accessible to your login role.
System configuration reports are useful in documenting the installed and configured system, and identifying details of
devices, meters, and meter tags such as Device ID and Meter ID.
This is an example of the Devices report run on the Efficient Industries Plant 1 project.