Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 326)

326 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
6. Select the message tag name field next to the
Ref_Status_Input parameter and type a tag name in the
format
xxx_MsgStatusInput1.
For this example, MCC_2_MsgStatusInput1 is entered for
the Gas Main meter.
7. Right-click the message tag name just entered and choose
New ‘ xxx_MsgStatusInput1’.
In this example, ‘MCC_2_MsgStatusInput1’ is selected.
8. Click OK to accept the default setup for the new message
tag.
Table 4 - PowerMonitor Status Input Add-on Instruction Tag References
PowerMonitor
Data Add-On
Instruction
Parameter Tags Message Tag PLC5 Address Message Destination
Tag
PowerMonitor
1000 PowerMonitor
3000 PowerMonitor
5000
Status 1
Count x 1 Ref_Status_Input
Val_Status_Input xxx
(1)
_MsgStatusInput1 F11:12 N9:4 F55:1 xxx(1)_Sta
tus1Count
Status 2
Count x 1 Ref_Status_Input
Val_Status_Input xxx(1)_MsgStat
usInput2 F11:13 N9:5 F55:3 xxx(1)_Stat
us2Count
Status 3
Count x 1 Ref_Status_Input
Val_Status_Input xxx(1)_MsgStat
usInput3 F55:5 xxx(1)_Stat
us3Count
Status 4
Count x 1 Ref_Status_Input
Val_Status_Input xxx(1)_MsgStat
usInput4 F55:7 xxx(1)_Stat
us4Count
(1) xxx is the PowerMonitor device name associated with the Add-on Instruction message tag and message destination tag. For example, the prefix MCC2 in MCC2_MsgStatusInput1 and
MCC2_Status1Count are the message tags for the MCC2 PM1000 Gas_Main device.