Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 236)

236 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
Create a Display Navigation Button
A display navigation button must be created to launch the PowerMonitor Faceplate at runtime. This can be drawn over an
existing graphic object that represents the device you intend to monitor/control or it can be configured to use a bitmap
image as the display.
1. From the display where you want to launch the faceplate (can be a new or an existing display), choose Objects >
Display Navigation > Goto.
2. Draw the Goto button rectangle.
3. Double-click the new Goto rectangle to configure the button properties.
a. Modify the appearance as desired for your application (for example, choose Transparent as the Back style if you
are drawing the Goto button over an existing object on your display).
b. Click the ellipse next to the Display field and assign the PowerMonitor500_Faceplate display.
c. Click the ellipse next to the Parameter file field and assign the PowerMonitor parameter file you created earlier for
this intended device.