System commissioning, Install system hardware – Rockwell Automation Energy Management Accelerator Toolkit Quick Start User Manual
Page 373
Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
373
Demand Control Chapter 12
10.
Click OK at the bottom of the RSLinx Enterprise dialog box to save
the communication setup changes.
System Commissioning
To commission the system, you need to install the system hardware and
download the projects.
Install System Hardware
Refer to the documentation listed below for information on installing the CompactLogix and PanelView Plus Hardware.
Document Name
Publication Number
Document Contents
CompactLogix Packaged Controller Installation
Instructions
• Installation Checklist
• Controller Dimensions
• How to Install the Battery
• How to Connect Expansion Modules
• Minimum Spacing Requirements
• How to Panel Mount
• How to DIN Rail Mount
• Grounding Considerations
• Wiring Power to the System
• Wire the I/O Removable Terminal Blocks
• Expansion Module Wiring
• Selecting Operating Mode
• Status Indicators
PanelView Plus Installation Manual
• Environmental Information
• Mounting Clearances
• Cutout Dimensions
• Panel Mounting Instructions
• Product Dimensions
• Removing and Installing the Power Terminal
Block
• DC Power Connections
• AC Power Connections
• Troubleshooting
• Battery Removal
• System Specifications
• Certifications