Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 235)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 235
FactoryTalk View ME Energy Faceplates Chapter 11
3. Double-click the parameter file to open it.
Parameter #1 represents the tag name for the specific Faceplate tag in your RSLogix 5000 project. Each tag contains
a controller shortcut name in brackets. This matches the shortcut name created in your RSLinx Enterprise
communication setup.
4. For parameter #1, change the shortcut name [CLX] to match your communication setup and DeviceName to match
the tag configured in your RSLogix5000 project.
For the MyPM500 example, the configuration looks like the following:
5. Save your parameter file.
6. To add parameter files for additional power monitors:
a. Right-click on the parameter file that you just created and choose Duplicate.
b. Rename the file with the new device name.
c. Open the parameter file and configure the tag to match the associated device.