Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 244)

244 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
Add a Parameter File
1. Right-click on Parameters, and choose 'Add Component Into Application'.
2. Navigate to the ME PowerMonitor 5000 Faceplate Files folder, select the ME_PowerMonitor5000_Parameter.par
file, and click Open.
Configure a Parameter File
1. From the explorer window in FactoryTalk View Studio, in the Parameters folder, right-click the
ME_PowerMonitor5000_Parameter.par file, and choose Rename.
2. Rename the parameter file with the name of the corresponding device in your RSLogix5000 application.
3. For example, MyPM5000_Parameter.
4. Double-click the parameter file to open it.
Parameter #1 represents the tag name for the specific Faceplate tag in your RSLogix 5000 project. Each tag contains
a controller shortcut name in brackets. This matches the shortcut name created in your RSLinx Enterprise
communication setup.