Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 137)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 137
FactoryTalk EnergyMetrix Software Meter and Tag Setup Chapter 7
7. Click Add when the screen refreshes.
8. Repeat steps 4…7 to add the remaining tags:
• Reactive Energy Net
• Real Power Demand
These are typical tags for electric meters.
9. When done, click the Return to meter screens
link or the meter tag.
The tags just entered should
appear on the Meter Setup
tab.
For this example, you should
see these tags.
10. Click the Meter Data tab to verify that the
meter data is being logged.
The data will not appear until the next
logging interval has occurred.
Another way to check the data is to return
to the Meter Setup tab and click the Read
device tags link just above the list of meter
tags.
You can click Current Date/Time to refresh
the data.