Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 336)

336 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
For this example, the Gas_Main PowerMonitor status input tag is selected.
8. Replace MeterName in
MeterName_AlarmName with
the corresponding Add-On
Instruction tag name selected in
the previous step.
For this example, Gas_Main is
entered.
9. Click OK to complete the
alarm logic import.
Two alarm logic rungs should
appear without errors.