Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 376)

376 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 12 Demand Control
6. Click Download.
7. Click OK when the download completes successfully.
8. Click Exit to close the File Transfer Utility.
Run Application on PanelView Plus Terminal
The (.mer) runtime file is now stored in the PanelView Plus
terminal so you are ready to run the application on the terminal.
1. Press F1, Load Application.
You can skip this step if you checked Run application at
start-up when creating the runtime application.
The Load Application window opens.
2. Press the up and down arrows to scroll through the list and select the application you want to load and run.
3. Press Load [F2] to load the application.
4. Press Yes [F7].
If you press No, the communication settings from the
previously run project will be used.
5. After the application loads, press Run [F2] to run the
application.