Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 314)

314 Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
Chapter 11 FactoryTalk View ME Energy Faceplates
4. Follow these steps to use a bitmap image with the button.
a. Click the Label Tab and click the ellipse next to the Image field.
Images are available for the Kinetix Servo drives in the ME_CIPMotion_GotoButtons folder.
b. Click Add from File, navigate to the gotobuttons folder, and select the desired image.
c. Click Open to add the image then OK to close the Image Browser window.
d. Add text in the Caption field if desired.
e. Click OK to close the Goto button properties window.
This is an example of a final goto button on your display.
5. To support additional Kinetix Servo Drives, create a new Goto display navigation button, assign the
CIPMotion_Faceplate_EnergyOnly display, and assign a unique parameter file associated with the additional
device.