Rockwell Automation Energy Management Accelerator Toolkit Quick Start - Manual (Page 297)

Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014 297
FactoryTalk View ME Energy Faceplates Chapter 11
6. In the Import Content organizer, select Other Components.
The communication path can be set for all messages by selecting the device from the I/O configuration drop-down
in the Component References.
7. Click OK.
The new Routine appears in the Controller Organizer within the selected program.
8. Add a JSR to your main routine, or other desired location, to execute the new routine.
Set Other SMC-50 Controller Parameters
SMC-50 controller parameter settings are very specific to your application and need to be reviewed carefully before
running your application.
1. Double click on the ‘SMC-50 Motor_1’ in the I/O Configuration tree.
2. On the General tab, click Change to configure any additional datalink parameters, other than those configured in
step 8 on page 294 , that are required for your application.
In this example, input parameter 17 and output parameter 189 were added.
3. Click OK and Apply to accept any changes.