Introduction, Before you begin, What you need – Rockwell Automation Energy Management Accelerator Toolkit Quick Start User Manual
Page 133: Chapter 7, Introduction before you begin what you need, Chapter
Rockwell Automation Publication IASIMP-QS016C-EN-P - October 2014
133
Chapter
7
FactoryTalk EnergyMetrix Software Meter and Tag Setup
Introduction
In this chapter, you will create meters and assign meter tags for your FactoryTalk EnergyMetrix software project.
• A meter is a logical source of data to FactoryTalk EnergyMetrix software. It is the unit used for licensing FactoryTalk
EnergyMetrix Manager software. Meters are associated with device data sources.
• A meter tag is the basic unit of data collection. Tags assigned to device meters are logged automatically at a selected
log rate.
Refer to the FactoryTalk EnergyMetrix tab in your Energy Data Worksheet for meter information in your project including
meter name, meter type, and meter tag names.
Meter configuration groups are based on the
example on page
.
Before You Begin
• Determine business goals, complete energy assessment, and determine monitoring methods (
• Select hardware and wire devices (
• Configure data collection devices (
• Install FactoryTalk EnergyMetrix software (
• Configure groups and security in (
).
• Configure FactoryTalk EnergyMetrix devices in (
).
What You Need
• FactoryTalk EnergyMetrix software CD, catalog number 9307-FTEMMENE
• FactoryTalk EnergyMetrix online help and user manual, publication
.
• Energy Management Accelerator Toolkit CD, publication IASIMP-SP014, or visit the Integrated Architecture
Tools and Resources website at
to download toolkit files.