Enterasys Networks D-Series - Manual (Page 82)

Clearing and Closing the CLI
2-44 Basic Configuration
Clearing and Closing the CLI
Purpose
To clear the CLI screen or to close your CLI session.
Commands
cls (clear screen)
Use this command to clear the screen for the current CLI session.
Syntax
cls
Parameters
None .
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to clear the CLI screen:
D2(su)->cls
exit
Use either of these commands to leave a CLI session.
Syntax
exit
Parameters
None.
Defaults
None.
For information about... Refer to page...
cls 2-44
exit 2-44