Enterasys Networks D-Series - Manual (Page 293)

Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Enterasys D-Series CLI Reference 9-21
Figure 9-1 Example of VLAN Propagation via GVRP
Purpose
To dynamically create VLANs across a switched network. The GVRP command set is used to
display GVRP configuration information, the current global GVRP state setting, individual port
settings (enable or disable) and timer settings. By default, GVRP is enabled globally on the device,
but disabled on all ports.
Commands
End
Station A
Switch 4
Switch 5
= Port registered as a member of VLAN Blue
= Port declaring VLAN Blue
D
R
1
1 2 3 D
R
D
Switch 1
1 R
R
3
Switch 2
1 2 D R D
Switch 3
1 R
For information about... Refer to page...
show gvrp 9-22
show garp timer 9-22
set gvrp 9-23
clear gvrp 9-24
set garp timer 9-24