Set macauthentication reauthentication, Set macauthentication portreauthenticate, Ed in – Enterasys Networks D-Series User Manual
Page 490: Macauthentication reauthentication

set macauthentication reauthentication
17-28
Security Configuration
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07
to re‐initialize:
D2(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable MAC reauthentication on
ge
.4.1 though 5:
D2(su)->set macauthentication reauthentication enable ge.4.1-5
set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
enable | disable
Enables or disables MAC reauthentication.
port‐string
Specifies port(s) on which to enable or disable MAC reauthentication. For a
detailed description of possible port‐string values, refer to “