Enterasys Networks D-Series - Manual (Page 395)

clear mac algorithm
Enterasys D-Series CLI Reference 14-23
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows the output of this command.
D2(su)->show mac algorithm
Mac hashing algorithm is mac-crc16-upperbits.
clear mac algorithm
Use this command to return the MAC hashing algorithm to the default value of mac‐crc16‐
upperbits.
Syntax
clear mac algorithm
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example resets the MAC hashing algorithm to the default value.
D2(su)->clear mac algorithm
set mac multicast
Use this command to define on what ports within a VLAN a multicast address can be dynamically
learned on, or on what ports a frame with the specified MAC address can be flooded. Also, use
this command to append ports to or clear ports from the egress ports list.
Syntax
set mac multicast mac-address vlan-id [port-string] [{append | clear} port-string]