Enterasys Networks D-Series - Manual (Page 460)

clear dhcp pool option
16-28 DHCP Server Configuration
clear dhcp pool option
Use this command to remove a DHCP option from the address pool being configured.
Syntax
clear dhcp pool poolname option code
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example removes option 19 from address pool “auto1.”
D2(rw)->clear dhcp pool auto1 option 19
show dhcp pool configuration
Use this command to display configuration information for one or all address pools.
Syntax
show dhcp pool configuration {poolname | all}
Parameters
Defaults
None.
Mode
Read‐only.
Example
This example displays configuration information for all address pools.
D2(rw)->show dhcp pool configuration all
Pool: Atg_Pool
Pool Type Dynamic
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
code Specifies the DHCP option code, as defined in RFC 2132. Value can range
from 1 to 254.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.