Show policy capability, Show policy capability -8, Show policy rule output details -8 – Enterasys Networks D-Series User Manual
Page 324: Syntax, Parameters, Defaults
show policy capability
11-8
Policy Classification Configuration
|admin|Port |ge.1.1 |16|ge.1.1 | A|NV| | 1|?|
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
provides an explanation of the command output.
show policy capability
Use this command to display detailed policy classification capabilities supported by your D‐Series
device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
Table 11-29
show policy rule Output Details
Output Field
What It Displays...
PID
Profile index number. Assigned to this classification rule with the set policy profile
command (“
Rule Type
Type of classification rule. Refer to
for valid types.
Rule Data
Rule data value. Refer to
for valid values for each classification type.
Mk
Rule data mask. Refer to
for valid values for each classification data
value.
PortStr
Ingress port(s) to which this rule applies.
RS
Whether or not the status of this rule is active (A), not in service or not ready.
ST
Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN
VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS
If applicable, Class of Service value to which this rule applies.
U
Whether or not this rule has been used.
dPID
Whether or not this is a dynamic profile ID.
aPID
Whether or not this is an administrative profile ID.