Enterasys Networks D-Series - Manual (Page 496)

show multiauth
17-34 Security Configuration
show multiauth
Use this command to display multiple authentication system configuration.
Syntax
show multiauth
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display multiple authentication system configuration:
D2(rw)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types : dot1x, pwa, mac
Maximum number of users : 768
Current number of users : 2
System mode : multi
Default precedence : dot1x, pwa, mac
Admin precedence : dot1x, pwa, mac
Operational precedence : dot1x, pwa, mac
set multiauth precedence 17-36
clear multiauth precedence 17-36
show multiauth port 17-37
set multiauth port 17-37
clear multiauth port 17-38
show multiauth station 17-39
show multiauth session 17-39
show multiauth idle-timeout 17-40
set multiauth idle-timeout 17-41
clear multiauth idle-timeout 17-42
show multiauth session-timeout 17-42
set multiauth session-timeout 17-43
clear multiauth session-timeout 17-44
For information about... Refer to page...