Enterasys Networks D-Series - Manual (Page 307)

Configuring Diffserv Policies and Assigning Classes
Enterasys D-Series CLI Reference 10-9
Example
This example shows how to rename the Diffserv “admin” class to “system”:
D2(rw)->set diffserv class rename admin system
Configuring Diffserv Policies and Assigning Classes
Purpose
To review, create, and configure Diffserv policies and assign classes.
Commands
show diffserv policy
Use this command to display information about Diffserv policies.
Syntax
show diffserv policy {summary | detailed policyname}
Parameters
Defaults
None.
Mode
Switch command. Read‐Only.
For information about... Refer to page...
show diffserv policy 10-9
set diffserv policy create 10-10
set diffserv policy delete 10-10
set diffserv policy class 10-11
set diffserv policy mark 10-11
set diffserv policy police style simple 10-12
set diffserv policy police action conform 10-13
set diffserv policy police action nonconform 10-13
set diffserv policy rename 10-14
summary Displays Diffserv policy summary information.
detailed
policyname Displays detailed Diffserv information for a specific policy.