Enterasys Networks D-Series - Manual (Page 134)

show port alias
6-8 Port Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable fe.1.3:
D2(su)->set port enable fe .1.3
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [port-string]
Parameters
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display alias information for ports 1‐3 on slot 3:
D2(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
set port alias
Use this command to assign an alias name to a port.
Syntax
set port alias port-string [name]
port‐string Specifies the port(s) to enable. For a detailed description of possible port‐
string values, refer to “
Port String Syntax Used in the CLI ” on page 6‐1.
port‐string (Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to “
Port String Syntax
Used in the CLI ” on page 6‐1.