Enterasys Networks D-Series - Manual (Page 498)

set multiauth precedence
17-36 Security Configuration
Example
This example shows how to clear the system authentication mode:
D2(rw)->clear multiauth mode
set multiauth precedence
Use this command to set the system’s multiple authentication administrative precedence.
Syntax
set multiauth precedence {[dot1x] [mac] }
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Usage
When a user is successfully authenticated by more than one method at the same time, the
precedence of the authentication methods will determine which RADIUS‐returned filter ID will be
processed and result in an applied traffic policy profile.
Example
This example shows how to set precedence for MAC authentication:
D2(rw)->set multiauth precedence mac dot1x
clear multiauth precedence
Use this command to clear the system’s multiple authentication administrative precedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
dot1x Sets precedence for 802.1X authentication.
mac Sets precedence for MAC authentication.