Enterasys Networks D-Series - Manual (Page 536)

Configuring Secure Shell (SSH)
17-74 Security Configuration
Configuring Secure Shell (SSH)
Purpose
To review, enable, disable, and configure the Secure Shell (SSH) protocol, which provides secure
Telnet.
Commands
show ssh status
Use this command to display the current status of SSH on the switch.
Syntax
show ssh status
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSH status on the switch:
D2(su)->show ssh status
SSH Server status: Disabled
set ssh
Use this command to enable, disable or reinitialize SSH server on the switch. By default, the SSH
server is disabled.
Syntax
set ssh {enable | disable | reinitialize}
For information about... Refer to page...
show ssh status 17-74
set ssh 17-74
set ssh hostkey 17-75