Enterasys Networks D-Series - Manual (Page 55)

set time
Enterasys D-Series CLI Reference 2-17
Mode
Switch command, read‐only.
Example
This example shows how to display the current time. The output shows the day of the week,
month, day, and the time of day in hours, minutes, and seconds and the year:
D2(su)->show time
THU SEP 05 09:21:57 2002
set time
Use this command to change the time of day on the system clock.
Syntax
set time [mm/dd/yyyy] [hh:mm:ss]
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the system clock to 7:50 a.m:
D2(su)->set time 7:50:00
show summertime
Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
[mm/dd/yyyy]
[hh:mm:ss] Sets the time in:
month, day, year and/or
24‐hour format
At least one set of time parameters must be entered.