Enterasys Networks D-Series - Manual (Page 515)

show maclock stations
Enterasys D-Series CLI Reference 17-53
show maclock stations
Use this command to display MAC locking information about end stations connected to the
switch.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
Defaults
If no parameters are specified, MAC locking information will be displayed for all end stations.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Gigabit Ethernet ports in unit/module 2:
D2(su)->show maclock stations fe .2.*
Port Number MAC Address Status State Aging
------------ ----------------- -------------- -------------- -----
fe .2.1 00:a0:c9:39:5c:b4 active first arrival true
fe .2.7 00:a0:c9:39:1f:11 active static false
Table 17‐48 provides an explanation of the command output.
Max Static Allocated The maximum static MAC addresses allowed locked to the port. For details on
setting this value, refer to “
set maclock static ” on page 17-57.
Max FirstArrival
Allocated The maximum end station MAC addresses allowed locked to the port. For details on
setting this value, refer to “
set maclock firstarrival ” on page 17-58.
Last Violating MAC
Address Most recent MAC address(es) violating the maximum static and first arrival value(s)
set for the port.
Table 17-47 show maclock Output Details (Continued)
Output Field What It Displays...
firstarrival (Optional) Displays MAC locking information about end stations first
connected to MAC locked ports.
static (Optional) Displays MAC locking information about static (management
defined) end stations connected to MAC locked ports.
port‐string (Optional) Displays end station information for specified port(s). For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 6‐1.