Set port lacp, Set port lacp -46, Syntax – Enterasys Networks D-Series User Manual
Page 172: Parameters
set port lacp
6-46
Port Configuration
Port Instance:
fe
.1.12
ActorPort:
1411
PartnerAdminPort:
1411
ActorSystemPriority:
32768
PartnerOperPort:
1411
ActorPortPriority:
32768
PartnerAdminSystemPriority:
32768
ActorAdminKey:
32768
PartnerOperSystemPriority:
32768
ActorOperKey:
32768
PartnerAdminPortPriority:
32768
ActorAdminState:
-----GlA
PartnerOperPortPriority:
32768
ActorOperState:
-F----lA
PartnerAdminKey:
1411
ActorSystemID:
00-e0-63-9d-b5-87
PartnerOperKey:
1411
SelectedAggID:
none
PartnerAdminState:
--DCSGlp
AttachedAggID:
none
PartnerOperState:
--DC-Glp
MuxState:
Detached
PartnerAdminSystemID:
00-00-00-00-00-00
DebugRxState:
port Disabled
PartnerOperSystemID:
00-00-00-00-00-00
This example shows how to display summarized LACP status information for port fe.1.12:
D2(su)->show port lacp port
fe
.1.12 status summary
Port
Aggr
Actor System
Partner System
Pri:
System ID: Key:
Pri: System ID:
Key:
fe
.1.12 none
[
(32768,00e0639db587,32768),(32768,000000000000, 1411)
]
This example shows how to display LACP counters for port fe.1.12:
D2(su)->show port lacp port
fe
.1.12 counters
Port Instance:
fe
.1.12
LACPDUsRx: 11067
LACPDUsTx: 0
IllegalRx: 0
UnknownRx: 0
MarkerPDUsRx: 0
MarkerPDUsTx: 0
MarkerResponsePDUsRx: 0
MarkerResponsePDUsTx: 374
set port lacp
Use this command to set link aggregation parameters for one or more ports. These settings will
determine the specified underlying physical ports’ ability to join a LAG, and their administrative
state once aggregated.
Syntax
set port lacp port port-string {[aadminkey aadminkey] [aadminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[aportpri aportpri] [asyspri asyspri] [enable | [disable] [padminkey padminkey]
[padminport padminport] [padminportpri padminportpri] [padminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[padminsysid padminsysid] [padminsyspri padminsyspri]
Parameters
port port‐string
Specifies the physical port(s) on which to configure LACP. For a detailed
description of possible port‐string values, refer to “
aadminkey
aadminkey
Sets the port’s actor admin key. LACP will use this value to form an oper
key and will determine which underlying physical ports are capable of
aggregating by comparing oper keys. Aggregator ports allow only
underlying ports with oper keys matching theirs to join their LAG. Valid
values are 1 ‐ 65535. The default key value is 32768.