Enterasys Networks D-Series - Manual (Page 153)

clear linkflap action
Enterasys D-Series CLI Reference 6-27
Defaults
None.
Mode
Switch mode, read‐write.
Example
This example shows how to set the link flap violation action on port fe.1.4 to generating a Syslog
entry.
D2(rw)->set linkflap action fe .1.4 gensyslogentry
clear linkflap action
Use this command to clear reactions to a link flap violation.
Syntax
clear linkflap action [port-string] {disableInterface | gensyslogentry | gentrap
| all}
Parameters
Defaults
If port‐string is not specified, actions will be cleared on all ports.
Mode
Switch mode, read‐write.
Example
This example shows how to clear the link flap violation action on port fe.1.4 to generating a Syslog
entry.
D2(rw)->clear linkflap action fe .1.4 gensyslogentry
set linkflap threshold
Use this command to set the link flap action trigger count.
Syntax
set linkflap threshold port-string threshold-value
port‐string (Optional) Specifies the port(s) on which to clear the link flap action.
disableInterface Clears the reaction as disabling the interface.
gensyslogentry Clears the reaction as generating a syslog entry.
gentrap Clears the reaction as generating an SNMP trap.
all Clears the reaction as all of the above.