Enterasys Networks D-Series - Manual (Page 486)

set macauthentication
17-24 Security Configuration
set macauthentication
Use this command to globally enable or disable MAC authentication.
Syntax
set macauthentication {enable | disable}
Parameters
Mode
Switch command, read‐write.
Defaults
None.
Example
This example shows how to globally enable MAC authentication:
D2(su)->set macauthentication enable
set macauthentication password
Use this command to set a MAC authentication password.
Syntax
set macauthentication password password
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Duration Time this session has been active.
Reauth Period Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in “
set macauthentication reauthperiod ” on
page 17-29.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in “
set
macauthentication reauthentication ” on page 17-28.
Table 17-45 show macauthentication session Output Details (Continued)
Output Field What It Displays...
enable | disable Globally enables or disables MAC authentication.
password Specifies a text string MAC authentication password.