Enterasys Networks D-Series User Manual

Page 323

show policy rule

Enterasys D-Series CLI Reference

11-7

Defaults

If verbose is not specified, summary information will be displayed.

Mode

Switch command, read‐only.

Example

This example shows how to display policy classification information for Ethernet type 2 rules

D2(su)->show policy rule ether

|PID |Rule Type |Rule Data |Mk|PortStr |RS|ST|VLAN|CoS |U|

|02 |Ether |2048 (0x0800) |16|All | A|NV|fwrd| |?|

|02 |Ether |2049 (0x0801) |16|All | A|NV|drop| |?|

|02 |Ether |2989 (0x0bad) |16|All | A|NV|drop| |?|

|02 |Ether |33079 (0x8137) |16|All | A|NV|drop| |?|

This example shows how to display policy classification information for administrative rule 1

D2(su)->show policy rule admin-pid 1

tcpdestport

Displays TCP destination port rules.

tcpsourceport

Displays TCP source port rules.

udpdestport

Displays UDP destination port rules.

udpsourceport

Displays UDP source port rules.

data

Displays rules for a predefined classifier. This value is dependent on the
classification type entered. Refer to

Table 11‐30

for valid values for each

classification type.

mask mask

(Optional) Displays rules for a specific data mask. Refer to

Table 11‐30

for

valid values for each classification type and data value.

port‐string port‐
string

(Optional) Displays rules related to a specific ingress port.

rule‐status active
| not‐in‐service |
not‐ready

(Optional) Displays rules related to a specific rules status.

storage‐type non‐
volatile | volatile

(Optional) Displays rules configured for either non‐volatile or volatile
storage.

vlan vlan

(Optional) Displays rules for a specific VLAN ID.

drop | forward

Displays rules based on whether matching packets will be dropped or
forwarded.

dynamic‐pid
dynamic‐pid

Displays rules associated with a specific dynamic policy ID.

cos cos

(Optional) Displays rules for a Class‐of‐Service value.

admin‐pid
admin‐pid

Displays rules associated with a specific administrative policy ID [1..1023].

‐verbose

(Optional) Displays detailed information.

usage‐list

(Optional) If selected, each ruleʹs usage‐list shall be checked and shall
display only those ports which have applied this rule.

display‐if‐used

(Optional) Displays rule(s) only if they are applied to at least one port.