Enterasys Networks D-Series - Manual (Page 317)

Enterasys D-Series CLI Reference 11-1
11
Policy Classification Configuration
This chapter describes the Policy Classification set of commands and how to use them.
Policy Classification Configuration Summary
D‐Series devices support policy profile‐based provisioning of network resources by allowing IT
administrators to:
• Create, change or remove policy profiles based on business‐specific use of network services.
• Permit or deny access to specific services by creating and assigning classification rules which
map user profiles to protocol‐based frame filtering policies configured for a particular VLAN
or Class of Service (CoS).
• Assign or unassign ports to policy profiles so that only ports activated for a profile will be
allowed to transmit frames accordingly.
Configuring Policy Profiles
Purpose
To review, create, change and remove user profiles that relate to business‐driven policies for
managing network resources.
Note: A license is required to enable Policy on the SecureStack B2 and B3 and the D-Series switch.
Refer to “
Activating Licensed Features ” on page 3-30 for more information.
For information about... Refer to page...
Policy Classification Configuration Summary 11-1
Configuring Policy Profiles 11-1
Configuring Classification Rules 11-6
Assigning Ports to Policy Profiles 11-15
Configuring Policy Class of Service (CoS) 11-17
Note: It is recommended that you use Enterasys Networks NetSight Policy Manager as an
alternative to CLI for configuring policy classification on the D-Series devices.