Enterasys Networks D-Series - Manual (Page 514)

show maclock
17-52 Security Configuration
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [port-string]
Parameters
Defaults
If port‐string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC locking information for ge .1.1.
D2(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
------- ------- -------- ------- ---------- --------------- ---------------
ge.1.1 enabled disabled enabled 20 1 00:a0:c9:39:5c:b4
Table 17‐47 provides an explanation of the command output.
set maclock move 17-60
set maclock trap 17-61
For information about... Refer to page...
port‐string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 6‐1.
Table 17-47 show maclock Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“
Port String Syntax Used in the CLI ” on page 6-1.
Port Status Whether MAC locking is enabled or disabled on the port. MAC locking is globally
disabled by default. For details on enabling MAC locking on the switch and on one or
more ports, refer to “
set maclock enable ” on page 17-54 and “ set maclock ” on
page 17-55.
Trap Status Whether MAC lock trap messaging is enabled or disabled on the port. For details
on setting this status, refer to “
set maclock trap ” on page 17-61.
Aging Status Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
Refer to “
set maclock agefirstarrival ” on page 17-59.