Enterasys Networks D-Series - Manual (Page 45)

set system password history
Enterasys D-Series CLI Reference 2-7
Example
This example shows how to set the system password age time to 45 days:
D2(su)->set system password aging 45
set system password history
Use this command to set the number of previously used user login passwords that will be checked
for password duplication. This prevents duplicate passwords from being entered into the system
with the set password command.
Syntax
set system password history size
Parameters
Defaults
None.
Mode
Switch command, super user.
Example
This example shows how to configure the system to check the last 10 passwords for duplication
D2(su)->set system password history 10
show system lockout
Use this command to display settings for locking out users after failed attempts to log in to the
system.
Syntax
show system lockout
Parameters
None.
Defaults
None.
Mode
Switch command, super user.
size Specifies the number of passwords checked for duplication. Valid values
are 0 to 10.