Mode, Usage, Example – Enterasys Networks D-Series User Manual
Page 325
show policy capability
Enterasys D-Series CLI Reference
11-9
Mode
Switch command, read‐only.
Usage
Use this command to display detailed policy classification capabilities supported by your D‐Series
device. The output of this command shows a table listing classifiable traffic attributes and the type
of actions, by rule type, that can be executed relative to each attribute. Above the table is a list of
all the actions possible on this device.
The left‐most column of the table lists all possible classifiable traffic attributes. The next two
columns from the left indicate how policy profiles may be assigned, either administratively or
dynamically. The next four columns from the left indicate the actions that may be performed. The
last three columns indicate auditing options.
An x in an action column for a traffic attribute row indicates that your system has the capability to
perform that action for traffic classified by that attribute.
Example
This example shows how to display the device’s policy classification capabilities. Refer to “
” on page 11‐10 for a description of the parameters displayed:
D2(su)->show policy capability
The following supports related to policy are supported in this device:
VLAN Forwarding Priority Permit
Deny Precedence Reordering Rules Table
Rule-Use Notification Longest Prefix Rules
=============================================================
| | D | | | | | F | | | D |
| | Y | | | | | O | S | | I |
| | N | A | | | | R | Y | | S |
| | A | D | V | | D | W | S | T | A |
| | M | M | L | C | R | A | L | R | B |
| | I | I | A | O | O | R | O | A | L |
| SUPPORTED RULE TYPES | C | N | N | S | P | D | G | P | E |
=============================================================
|MAC source address | | | | X | X | X | | | |
|MAC destination address | | | | X | X | X | | | |
|IPX source address | | | | | | | | | |
|IPX destination address | | | | | | | | | |
|IPX source socket | | | | | | | | | |
|IPX destination socket | | | | | | | | | |
|IPX transmission control | | | | | | | | | |
|IPX type field | | | | | | | | | |
|IPv6 source address | | | | | | | | | |
|IPv6 destination address | | | | | | | | | |
|IPv6 flow label | | | | | | | | | |
|IP source address | | | | X | X | X | | | |
|IP destination address | | | | X | X | X | | | |
|IP fragmentation | | | | | | | | | |
|UDP port source | | | | X | X | X | | | |
|UDP port destination | | | | X | X | X | | | |
|TCP port source | | | | X | X | X | | | |
|TCP port destination | | | | X | X | X | | | |
|ICMP packet type | | | | X | X | X | | | |
|TTL | | | | | | | | | |
|IP type of service | | | | X | X | X | | | |
|IP proto | | | | X | X | X | | | |