Enterasys Networks D-Series - Manual (Page 184)

show snmp engineid
7-4 SNMP Configuration
Commands
show snmp engineid
Use this command to display the SNMP local engine ID. This is the SNMP v3 engine’s
administratively unique identifier.
Syntax
show snmp engineid
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP engine properties:
D2(su)->show snmp engineid
EngineId: 80:00:15:f8:03:00:e0:63:9d:b5:87
Engine Boots = 12
Engine Time = 162181
Max Msg Size = 2048
Table 7‐13 provides an explanation of the command output.
For information about... Refer to page...
show snmp engineid 7-4
show snmp counters 7-5
Table 7-13 show snmp engineid Output Details
Output Field What It Displays...
EngineId String identifying the SNMP agent on the device.
Engine Boots Number of times the SNMP engine has been started or reinitialized.
Engine Time Time in seconds since last reboot.
Max Msg Size Maximum accepted length, in bytes, of SNMP frame.