Enterasys Networks D-Series - Manual (Page 313)

show diffserv service info
Enterasys D-Series CLI Reference 10-15
Commands
show diffserv service info
Use this command to display information about Diffserv service ports.
Syntax
show diffserv service info {summary | detailed port-string} {in}
Parameters
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display a summary of incoming Diffserv service port traffic:
D2(rw)->show diffserv service info summary in
DiffServ Admin Mode............................ Enable
Interface Direction OperStatus Policy Name
----------- ----------- ---------- ----------------------
ge.1.1 In Up admin
ge.1.2 In Up admin
ge.1.3 In Up admin
show diffserv service stats
Use this command to display Diffserv policy service statistics.
Syntax
show diffserv service stats {summary | detailed port-string} {in}
For information about... Refer to page...
show diffserv service info 10-15
show diffserv service stats 10-15
set diffserv service 10-16
summary Displays Diffserv service port summary information.
detailed port‐string Displays detailed information for a specific port(s).
in Displays information about incoming traffic.