Configuring spanning tree port parameters, Purpose, Commands – Enterasys Networks D-Series User Manual
Page 251: Set spantree portadmin, Configuring spanning tree port parameters -33, Purpose -33 commands -33, Set spantree portadmin -33
Configuring Spanning Tree Port Parameters
Enterasys D-Series CLI Reference
8-33
Configuring Spanning Tree Port Parameters
Purpose
To display and set Spanning Tree port parameters.
Commands
set spantree portadmin
Use this command to disable or enable the Spanning Tree algorithm on one or more ports.
Syntax
set spantree portadmin port-string {disable | enable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
For information about...
Refer to page...
set spantree portadmin
clear spantree portadmin
show spantree portadmin
show spantree portpri
set spantree portpri
clear spantree portpri
show spantree adminpathcost
set spantree adminpathcost
clear spantree adminpathcost
show spantree adminedge
set spantree adminedge
clear spantree adminedge
port‐string
Specifies the port(s) for which to enable or disable Spanning Tree. For a
detailed description of possible port‐string values, refer to “
disable | enable
Disables or enables Spanning Tree.