Enterasys Networks D-Series - Manual (Page 143)

set port advertise
Enterasys D-Series CLI Reference 6-17
Example
This example shows how to display advertisement status for Gigabit ports 13 and 14:
D2(su)->show port advertise ge.1.13-14
ge.1.13 capability advertised remote
-------------------------------------------------
10BASE-T yes yes yes
10BASE-TFD yes yes yes
100BASE-TX yes yes yes
100BASE-TXFD yes yes yes
1000BASE-T no no no
1000BASE-TFD yes yes yes
pause yes yes no
ge.1.14 capability advertised remote
-------------------------------------------------
10BASE-T yes yes yes
10BASE-TFD yes yes yes
100BASE-TX yes yes yes
100BASE-TXFD yes yes yes
1000BASE-T no no no
1000BASE-TFD yes yes yes
pause yes yes no
set port advertise
Use this command to configure what a port will advertise for speed/duplex capabilities in auto‐
negotiation.
Syntax
set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}
Parameters
Defaults
None.
port‐string Select the ports for which to configure advertisements. For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 6‐1.
10t Advertise 10BASE‐T half duplex mode.
10tfd Advertise 10BASE‐T full duplex mode.
100tx Advertise 100BASE‐TX half duplex mode.
100txfd Advertise 100BASE‐TX full duplex mode. Refer to “ Configuring SFP Ports
for 100BASE‐FX ” on page 6‐2 for more information on setting advertised
ability for 100 Mb SFP tranceivers.
1000t Advertise 1000BASE‐T half duplex mode.
1000tfd Advertise 1000BASE‐T full duplex mode.
pause Advertise PAUSE for full‐duplex links.