Introduction, D-series cli overview, Switch management methods – Enterasys Networks D-Series User Manual
Page 29: Chapter 1: introduction, Chapter 1
Enterasys D-Series CLI Reference
1-1
1
Introduction
This chapter provides an overview of the D‐Series’s unique features and functionality, an
overview of the tasks that may be accomplished using the CLI interface, an overview of ways to
manage the switch, factory default settings, and information about how to use the Command Line
Interface to configure the switch.
D-Series CLI Overview
The Enterasys Networks D‐Series CLI interface allows you to perform a variety of network
management tasks, including the following:
•
Use CLI commands to perform network management and switch configuration operations.
•
Download a new firmware image.
•
Assign IP address and subnet mask.
•
Select a default gateway.
•
Establish and manage Virtual Local Area Networks (VLANs).
•
Establish and manage policy profiles and classifications.
•
Establish and manage priority classification.
•
Configure security protocols, including 802.1X and RADIUS, SSHv2, PWA, MAC locking, and
MAC authentication.
Switch Management Methods
The D‐Series switch can be managed using the following methods:
•
Locally using a VT type terminal connected to the console port.
•
Remotely using a VT type terminal connected through a modem.
•
Remotely using an SNMP management station.
•
In‐band through a Telnet connection.
•
In‐band using the Enterasys NetSight
®
management application.
For information about...
Refer to page...