Enterasys Networks D-Series - Manual (Page 511)

show vlanauthorization
Enterasys D-Series CLI Reference 17-49
Mode
Switch command, read‐write.
Example
This example show how to clear VLAN authorization for all ports on slots 3, 4, and 5:
D2(rw)->clear vlanauthorization ge.3-5.*
show vlanauthorization
Displays the VLAN authentication status and configuration information for the specified ports.
Syntax
show vlanauthorization [port-string]
Parameters
Defaults
If no port string is entered, the status for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This command shows how to display VLAN authorization status for ge.1.1:
G3(su)‐>show vlanauthorization ge.1.1
Vlan Authorization: ‐ enabled
port status administrative operational authenticated vlan id
egress egress mac address
------- -------- -------------- ----------- ----------------- -------
ge.1.1 enabled untagged
Table 17‐46 provides an explanation of command output. For details on enabling and assigning
protocol and egress attributes, refer to “ set vlanauthorization ” on page 17‐47 and “ set
vlanauthorization egress ” on page 17‐48.
port‐string (Optional) Displays VLAN authentication status for the specified ports. If
no port string is entered, then the global status of the setting is displayed.
For a detailed description of possible port‐string values, refer to “
Port
String Syntax Used in the CLI ” on page 6‐1.
Table 17-46 show vlanauthorization Output Details
Output Field What It Displays...
port Port identification
status Port status as assigned by set vlanauthorization command
administrative
egress Port status as assigned by the set vlanauthorization egress command
operational egress Port operational status of vlanauthorization egress.