Enterasys Networks D-Series - Manual (Page 384)

Monitoring Network Events and Status
14-12 Logging and Network Management
Monitoring Network Events and Status
Purpose
To display switch events and command history, to set the size of the history buffer, and to display
and disconnect current user sessions.
Commands
history
Use this command to display the contents of the command history buffer. The command history
buffer includes all the switch commands entered up to a maximum of 100, as specified in the set
history command (“
set history ” on page 14‐13).
Syntax
history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the contents of the command history buffer. It shows there are
five commands in the buffer:
D2(su)->history
1 hist
2 show gvrp
3 show vlan
4 show igmp
5 show ip address
For information about... Refer to page...
history 14-12
show history 14-13
set history 14-13
ping 14-14
show users 14-14
disconnect 14-15