Enterasys Networks D-Series - Manual (Page 385)

show history
Enterasys D-Series CLI Reference 14-13
show history
Use this command to display the size (in lines) of the history buffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the size of the history buffer:
D2(su)->show history
History buffer size: 20
set history
Use this command to set the size of the history buffer.
Syntax
set history size [default]
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the size of the command history buffer to 30 lines:
D2(su)->set history 30
size Specifies the size of the history buffer in lines. Valid values are 1 to 100.
default (Optional) Makes this setting persistent for all future sessions.