Enterasys Networks D-Series - Manual (Page 396)

clear mac address
14-24 Logging and Network Management
Parameters
Defaults
If no port‐string is defined, the command will apply to all ports.
Mode
Switch command, read‐write.
Example
This example configures multicast MAC address 01‐01‐22‐33‐44‐55 for VLAN 24.
D2(su)->set mac multicast 01-01-22-33-44-55 24
clear mac address
Use this command to remove a multicast MAC address.
Syntax
clear mac address mac-address [vlan-id]
Parameters
Defaults
If no vlan‐id is specified, the multicast MAC address is cleared from all VLANs.
Mode
Switch command, read‐write.
Example
This example clears multicast MAC address 01‐01‐22‐33‐44‐55 from VLAN 24.
D2(su)->clear mac multicast 01-01-22-33-44-55 24
mac‐address Specifies the multicast MAC address. The MAC address can be
formatted as xx:xx:xx:xx:xx:xx or xx‐xx‐xx‐xx‐xx‐xx.
vlan‐id Specifies the VLAN ID containing the ports.
port‐string Specifies the port or range of ports the multicast MAC address can be
learned on or flooded to.
append | clear Appends or clears the port or range of ports from the egress port list.
mac‐address Specifies the multicast MAC address to be cleared. The MAC address
can be formatted as xx:xx:xx:xx:xx:xx or xx‐xx‐xx‐xx‐xx‐xx.
vlan‐id (Optional) Specifies the VLAN ID from which to clear the static
multicast MAC address.