Show mac agetime, Show mac agetime -20, Show mac output details -20 – Enterasys Networks D-Series User Manual
Page 392
show mac agetime
14-20
Logging and Network Management
Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display MAC address information for
ge
.3.1:
D2(su)->show mac port ge.3.1
MAC Address FID Port Type
----------------- ---- ------------- --------
00-09-6B-0F-13-E6 15 ge.3.1 Learned
MAC Address VLAN Port Type Status Egress Ports
----------------- ---- ------------- ------- ------- ---------------------------
01-01-23-34-45-56 20 any mcast perm ge.3.1
provides an explanation of the command output.
show mac agetime
Use this command to display the timeout period for aging learned MAC entries.
Syntax
show mac agetime
Parameters
None.
Table 14-36
show mac Output Details
Output Field
What It Displays...
MAC Address
MAC addresses mapped to the port(s) shown.
FID
Filter database identifier.
Port
Port designation.
Type
Address type. Valid types are:
•
Learned
•
Self
•
Management
•
Other (this will include any static MAC locked addresses as described in
“
•
mcast (multicast)
VLAN
The VLAN ID configured for the multicast MAC address.
Status
The status of the multicast address.
Egress Ports
The ports which have been added to the egress ports list.