Enterasys Networks D-Series - Manual (Page 406)

Configuring Node Aliases
14-34 Logging and Network Management
Configuring Node Aliases
Purpose
To review, disable, and re‐enable node (port) alias functionality, which determines what network
protocols are running on one or more ports.
Commands
show nodealias config
Use this command to display node alias configuration settings on one or more ports.
Syntax
show nodealias config [port-string]
Parameters
Defaults
If port‐string is not specified, node alias configurations will be displayed for all ports.
Mode
Switch command, read‐only.
Example
This example shows how to display node alias configuration settings for ports fe.2.1 through 9:
D2(rw)->show nodealias config fe .2.1-9
Port Number Max Entries Used Entries Status
----------- ----------- ------------ ------
fe .2.1 16 0 Enable
fe .2.2 47 0 Enable
fe .2.3 47 2 Enable
fe .2.4 47 0 Enable
fe .2.5 47 0 Enable
fe .2.6 47 2 Enable
fe .2.7 47 0 Enable
fe .2.8 47 0 Enable
fe .2.9 4000 1 Enable
Table 14‐38 provides an explanation of the command output.
For information about... Refer to page...
show nodealias config 14-34
set nodealias 14-35
clear nodealias config 14-35
port‐string (Optional) Displays node alias configuration settings for specific port(s).