Enterasys Networks D-Series - Manual (Page 300)

Globally Enabling or Disabling Diffserv
10-2 Differentiated Services Configuration
Globally Enabling or Disabling Diffserv
Purpose
To globally enable or disable Diffserv on the device.
Command
set diffserv adminmode
Use this command to globally enable or disable Diffserv on the device. By default, this function is
disabled at device startup.
Syntax
set diffserv adminmode {enable | disable}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to enable Diffserv:
D2(rw)->set diffserv adminmode enable
For information about... Refer to page...
set diffserv adminmode 10‐2
enable | disable Enables or disables Diffserv.