Enterasys Networks D-Series - Manual (Page 537)

set ssh hostkey
Enterasys D-Series CLI Reference 17-75
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable SSH:
D2(su)->set ssh disable
set ssh hostkey
Use this command to set or reinitialize new SSH authentication keys.
Syntax
set ssh hostkey [reinitialize]
Parameters
Defaults
If reinitialize is not specified, the user must supply SSH authentication key values.
Mode
Switch command, read‐write.
Example
This example shows how to regenerate SSH keys:
D2(su)->set ssh hostkey reinitialize
enable | disable Enables or disables SSH, or reinitializes the SSH server.
reinitialize Reinitializes the SSH server.
reinitialize (Optional) Reinitializes the server host authentication keys.