Enterasys Networks D-Series User Manual

Enterasys, D-series

Enterasys

D-Series

Ethernet Switches

CLI Reference

Firmware Version 1.00.01.0005 or Higher

P/N 9034394-01

Table of contents

Document Outline

Enterasys D-Series CLI Reference
Notice
- Enterasys Networks, Inc. Firmware License Agreement
Contents
- Figures
- Tables
About This Guide
- Using This Guide
- Structure of This Guide
- Related Documents
- Conventions Used in This Guide
- Getting Help
Introduction
- D-Series CLI Overview
- Switch Management Methods
- Factory Default Settings
- Using the Command Line Interface
Basic Configuration
- Quick Start Setup Commands
- Setting User Accounts and Passwords
  - Purpose
  - Commands
- Setting Basic Switch Properties
  - Purpose
  - Commands
- Downloading a Firmware Image
- Reviewing and Selecting a Boot Firmware Image
  - Purpose
  - Commands
    - show boot system
    - set boot system
- Starting and Configuring Telnet
  - Purpose
  - Commands
- Managing Switch Configuration and Files
- Clearing and Closing the CLI
  - Purpose
  - Commands
    - cls (clear screen)
    - exit
- Resetting the Switch
  - Purpose
  - Commands
    - reset
    - clear config
- Using and Configuring WebView
  - Purpose
  - Commands
Activating Licensed Features
- Clearing, Showing, and Moving Licenses
- Commands
Configuring System Power and PoE
- Commands
Discovery Protocol Configuration
- Configuring CDP
  - Purpose
  - Commands
- Configuring Cisco Discovery Protocol
  - Purpose
  - Commands
- Configuring Link Layer Discovery Protocol and LLDP-MED
Port Configuration
- Port Configuration Summary
  - Port String Syntax Used in the CLI
    - Port Slot/Unit Parameters Used in the CLI
    - Examples
  - Configuring SFP Ports for 100BASE-FX
    - Example
- Reviewing Port Status
  - Purpose
  - Commands
- Disabling / Enabling and Naming Ports
  - Purpose
  - Commands
- Setting Speed and Duplex Mode
  - Purpose
  - Commands
- Enabling / Disabling Jumbo Frame Support
  - Purpose
  - Commands
- Setting Auto-Negotiation and Advertised Ability
  - Purpose
  - Commands
- Setting Flow Control
  - Purpose
  - Commands
    - show flowcontrol
    - set flowcontrol
- Setting Port Link Traps and Link Flap Detection
  - Purpose
  - Commands
- Configuring Broadcast Suppression
  - Purpose
  - Commands
- Port Mirroring
- Link Aggregation Control Protocol (LACP)
- Configuring Protected Ports
  - Protected Port Operation
  - Commands
SNMP Configuration
- SNMP Configuration Summary
- Reviewing SNMP Statistics
  - Purpose
  - Commands
    - show snmp engineid
    - show snmp counters
- Configuring SNMP Users, Groups, and Communities
  - Purpose
  - Commands
- Configuring SNMP Access Rights
  - Purpose
  - Commands
- Configuring SNMP MIB Views
  - Purpose
  - Commands
- Configuring SNMP Target Parameters
  - Purpose
  - Commands
- Configuring SNMP Target Addresses
  - Purpose
  - Commands
- Configuring SNMP Notification Parameters
- Creating a Basic SNMP Trap Configuration
  - Example
    - How SNMP Will Use This Configuration
Spanning Tree Configuration
- Spanning Tree Configuration Summary
- Configuring Spanning Tree Bridge Parameters
  - Purpose
  - Commands
- Configuring Spanning Tree Port Parameters
  - Purpose
  - Commands
- Configuring Spanning Tree Loop Protect Parameters
  - Purpose
  - Commands
802.1Q VLAN Configuration
- VLAN Configuration Summary
  - Port String Syntax Used in the CLI
  - Creating a Secure Management VLAN
- Viewing VLANs
  - Purpose
  - Command
    - show vlan
- Creating and Naming Static VLANs
  - Purpose
  - Commands
- Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
  - Purpose
  - Commands
- Configuring the VLAN Egress List
  - Purpose
  - Commands
- Setting the Host VLAN
  - Purpose
  - Commands
- Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
Differentiated Services Configuration
- Globally Enabling or Disabling Diffserv
  - Purpose
  - Command
    - set diffserv adminmode
- Creating Diffserv Classes and Matching Conditions
  - Purpose
  - Commands
- Configuring Diffserv Policies and Assigning Classes
  - Purpose
  - Commands
- Assigning Policies to Service Ports
  - Purpose
  - Commands
- DiffServ Configuration Examples
Policy Classification Configuration
- Policy Classification Configuration Summary
- Configuring Policy Profiles
  - Purpose
  - Commands
- Configuring Classification Rules
  - Purpose
  - Commands
- Assigning Ports to Policy Profiles
  - Purpose
  - Commands
    - set policy port
    - clear policy port
- Configuring Policy Class of Service (CoS)
  - About Policy-Based CoS Configurations
    - Example
  - Commands
Port Priority and Rate Limiting Configuration
- Port Priority Configuration Summary
- Configuring Port Priority
  - Purpose
  - Commands
- Configuring Priority to Transmit Queue Mapping
  - Purpose
  - Commands
- Configuring Quality of Service (QoS)
  - Purpose
  - Commands
- Configuring Port Traffic Rate Limiting
  - Purpose
  - Commands
IGMP Configuration
- IGMP Overview
  - About IP Multicast Group Management
  - About Multicasting
- Configuring IGMP at Layer 2
  - Purpose
  - Commands
Logging and Network Management
- Configuring System Logging
  - Purpose
  - Commands
- Monitoring Network Events and Status
  - Purpose
  - Commands
- Managing Switch Network Addresses and Routes
  - Purpose
  - Commands
- Configuring Simple Network Time Protocol (SNTP)
  - Purpose
  - Commands
- Configuring Node Aliases
  - Purpose
  - Commands
RMON Configuration
- RMON Monitoring Group Functions
- Statistics Group Commands
  - Purpose
  - Commands
- History Group Commands
  - Purpose
  - Commands
- Alarm Group Commands
  - Purpose
  - Commands
- Event Group Commands
  - Purpose
  - Commands
- Filter Group Commands
  - Commands
- Packet Capture Commands
  - Purpose
  - Commands
DHCP Server Configuration
- DHCP Overview
  - DHCP Server
  - Configuring a DHCP Server
- Configuring General DHCP Server Parameters
  - Purpose
  - Commands
- Configuring IP Address Pools
Security Configuration
- Overview of Security Methods
  - RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment
    - Filter-ID Attribute Formats
- Configuring RADIUS
  - Purpose
  - Commands
- Configuring 802.1X Authentication
  - Purpose
  - Commands
- Configuring MAC Authentication
  - Purpose
  - Commands
- Configuring Multiple Authentication Methods
- Configuring VLAN Authorization (RFC 3580)
  - Purpose
  - Commands
- Configuring MAC Locking
  - Purpose
  - Commands
- Configuring Port Web Authentication (PWA)
- Configuring Secure Shell (SSH)
  - Purpose
  - Commands
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- J
- K
- L
- M
- N
- P
- R
- S
- T
- U
- V
- W